SNES SA-1 Mask ROM Adapter (27C322)

This is the listing for an unpopulated adapter board that can be used to replace the surface mount ROM on SA-1 SNES boards with the through-hole 27C322. Just remove the original ROM, solder the edge castellated holes to the pads, and then put your programmed 27C322 on the board. You will need to cut the pins on the right side of the chip, and then solder them to the pads on the board. Try to get the 27C322 as low to the board as possible! It is a tight fit.

Full information on the build, including a detailed tutorial, can be found at my website here, which you ABSOLUTELY MUST read through before taking on this project: https://mousebitelabs.com/2021/03/28/sa-1-eprom-adapter-board/